C.1.3 Predefined Settings Mode - AOIP CALYS 50 Mode D'emploi

CALYS 50 / 75 / 100
ADVANCED OPERATION
C.1.3 Predefined Settings mode
This mode is available for the DC current transmission function for the 0-20 mA and 4-20 mA ranges only.
Two types of predefined settings are offered: Valve Test and Percentage of full scale (% of FS).
In the case of valve test, the predefined values are displayed in the left hand side of the transmission window. The
icon is displayed in the right hand side of the window.
The Up/Down keys of the navigator can be used to select the setting from the list. The ENTER key transmits the selected
setting. The Left/Right keys of the navigator are used to transmit the previous/next setting. The numerical keys 0 - 9 are
used to enter the value to be transmitted on the keyboard.
In the case of values predefined as a percentage of full scale, the icon appears on the left hand side of the
transmission window.
The icon indicates setting to scale. To display the scale applied, use the Configuration menu, then the "set to scale"
menu.
130 / 164 NTA47227-300A8