Continuity Test; Measuring Frequency - AOIP CALYS 150 Mode D'emploi

CALYS 150

Continuity test

Display the MEASUREMENT MENU dialogue box:
Select the Continuity measurement function using the function and navigation keys.
Confirm with ENTER.
The CALYS 150 makes a resistance measurement in this mode and displays "open" if the resistance measured is greater
than 1000 Ohm and "closed" if the resistance measured is less than 1000 Ohm.

Measuring frequency

Display the MEASUREMENT MENU dialogue box:
Select the Frequency "measurement function", then the measurement range with function and navigation keys.
Confirm with ENTER.
Connection is made between the Hz and COM terminals.
Units are displayed in Hertz (Hz) for 100000Hz and 10000Hz ranges or in beats per minute (BPM) for 600000 CPM range.
The input voltage of periodic signals must not exceed 60 Volts peak to peak.
The following ranges are available:
Range
Resolution
126 / 194 NTA47224-300A9
10000 Hz 100000 Hz
10 mHz min 10 mHz min
GETTING STARTED
600000 BPM
0.1 BPM