Incremental Edit Mode; Predefined Settings Mode - AOIP CALYS 150 Mode D'emploi

CALYS 150

Incremental Edit Mode

When this mode is active, the
Use the 4 navigator keys to edit the value to be transmitted.
To select a digit, use the Left
display (white on black).
To increment/decrement the digit selected, use the Up
The value displayed is immediately active and it is not necessary to confirm it.

Predefined Settings Mode

This mode is available for the DC current transmission function for the 0-20 mA and 4-20 mA ranges only.
Two types of predefined settings are offered: Valve Test and Percentage of full scale (% of FS).
In the case of valve test, the predefined values are displayed in the left hand side of the transmission window. The
icon is displayed in the right hand side of the window.
The Up/Down keys of the navigator can be used to select the setting from the list. The ENTER key transmits the selected
setting. The Left/Right keys of the navigator are used to transmit the previous/next setting. The numerical keys 0 - 9 are
used to enter the value to be transmitted on the keyboard.
158 / 194 NTA47224-300A9
icon appears in the transmission window.
and Right keys of the navigator. The editable digit appears reversed in the
ADVANCED OPERATION
or Down key of the navigator.