Measuring Resistance - AOIP CALYS 150 Mode D'emploi

Measuring resistance

Display the MEASUREMENT MENU dialogue box:
Select the Idc measurement function then the correct measurement range using the function and navigation keys.
Confirm with ENTER.
The following ranges are available:
Range (1)
Resolution
Measurement current
(1) 50 KOhm range only for channel 1
To carry out a correct resistance measurement with 3 wires, the 3 conductors used must be:
of the same length,
of the same diameter,
of the same type of metal.
The CALYS 150 displays an icon showing the connections used (
make the measurement. The wiring arrangement is automatically detected by the calibrator.
400 Ohm 3600 Ohm
1 mOhm 10 mOhm
0.2 to 0.45 mA 0.2 to 0.45 mA
Measurement on channel V1
50 KOhm Auto
0.1 Ohm --
10 µA à 25 µA
for 2 wire, for 3 wire or
NTA47224-300A9
B
4 wire) to
125 / 194