Longines L441 Mode D'emploi page 26

28 CALIBRE L441
3. Select TABLE C
PRESS
• The tables counter hand completes one high-speed
rotation.
• Default configuration with TABLE A applied.
When push-piece is pressed, the tables counter hand
points to 120 under TABLE C.
Press to go to TABLE C
Press to go back to TABLE A
For this example under TABLE C, go back to TABLE C by
.
pressing push-piece
4. Save TABLE C selection
PRESS
• The central counter seconds hand completes one high-
speed rotation.
• The tables counter hand completes one high-speed
rotation.
• Program the round elimination time limit under TABLE C.
5. Program the elimination time limit
Using push-pieces and
• You can choose between two elimination time limits, either
120 or 180 seconds, depending on the course length.
• Press to go to 180 seconds for courses over 500 metres.
• Press to go to 120 seconds for courses under
500 metres.
Longines_MDE-L441.indb 28
6. Save the elimination time limit
PRESS
• The pts/sec penalties counter hand completes one high-speed
rotation.
• Program the number of seconds added for faults committed
by the rider.
7. Program the number of seconds added per fault
Using push-pieces and
• By default, 4 seconds' penalty per fault are applied on the watch.
• Each press on push-piece
counter. You can select 4, 3 or 2 added seconds for each fault
committed by the rider.
• Each press on push-piece
counter. You can select 2, 3 or 4 added seconds for each fault
committed by the rider.
8. Save final programming
2 SECONDS
• The central counter seconds hand and chronograph hundredths
of a second counter hand are positioned to 12 o'clock.
• The tables counter hand points to C.
• The pts/sec penalties counter hand points to zero.
• The watch is ready to time a jumping competition round under
TABLE C, with an elimination time limit programmed in step
No.5.
You can exit JUMPING mode programming after each setting step.
2 SECONDS
OR
Select TABLE A
8. Back to step No.3
Select TABLE C
PRESS
decrements the pts/sec penalties
increments the pts/sec penalties
01.04.15 14:44