Longines L441 Mode D'emploi page 24

26 CALIBRE L441
JUMPING MODE
Push-piece
• Initialise the watch
• Enter and exit setting mode
• Round phases*
• Navigate within setting mode
Pts/sec penalties counter
Chronograph seconds and
1/100ths of a second counter
* The phases of a jumping
round are:
1. Start countdown
2. Start chronograph
3. Stop chronograph
4. Reset
PROGRAMMING
1. Initialise
4 SECONDS
Press and hold the push-piece until the hands move for the
second time.
• The central counter seconds hand and chronograph
hundredths of a second counter hand are positioned
to 12 o'clock.
• The tables counter hand is positioned to 12 o'clock.
• The pts/sec penalties counter hand is positioned to zero.
Action for returning to CHRONOGRAPH function and reinitialising
the JUMPING mode programming.
Longines_MDE-L441.indb 26
Tables and minute timing
counter
Push-piece
• Increment values,
• Pause/resume countdown,
• Pause/resume round time or
Push-piece
• Decrement values
• Add and subtract penalties
2. Enter JUMPING mode programming
2 SECONDS
• The central counter seconds hand is positioned to 4 o'clock,
while the hundredths hand remains at 12 o'clock.
• The tables counter hand is positioned to A.
• The pts/sec penalties counter hand is positioned to 4.
Default confi guration upon entering JUMPING mode
programming.
countdown
01.04.15 14:44