Publicité
Les langues disponibles
Les langues disponibles
8.1 coMMIssIoNING
A. Power up the unit. The main screen is
displayed.
B. Press the "COMMISSION" ("Mise en
service") button, the commissioning screen
is displayed.
C. Start filling the tank with softened water.
Select the "Fill tank" ("Remplissage réservoir")
button, it will turn green.
- Start filling by pressing the "START"
button, the status will go from "STOP" to
"RUNNING" ("EN COURS") and the colour
will change from grey to green.
- When the tank is full, stop by pressing
the "STOP" button.
Tank filling is automatic in production mode.
D. Proceed with priming the softened water
injection pump.
- Select the " S O F T E N E D WAT E R
INJECTION PUMP PRIMING" ("Amorçage
pompe doseuse eau adoucie") button, this
will turn green.
- Start the injection pump by pressing
the "START" button, the status will go from
"STOP" to "RUNNING" ("EN COURS") and
the colour will change from grey to green.
- Stop priming by pressing the "STOP"
button as soon as the dosed solution starts
to come out of the pump.
42
Technical manual ECO MX NANO electrolyser code EN_P0011183 - Rev 7 - 19/04/2019
8. oPEratIoN
Publicité
