Roger Technology EDGE1 Instructions Et Consignes Pour L'installateur page 62

11
Travel acquisition
For the system to function correctly, the gate travel must be acquired by the control.
11.1
Before starting
1. Select the automation system model installed with the parameter
HIGH SPEED Motor
SELECTION
BE20/200/HS
Serie BR20
BH23/282
BR21/351,
BR21/361,
BR21/362
SMARTY5
SMARTY7
SMARTY7R
SMARTY5R5
SMARTY4HS
BH23/252/HS
BR21/351/HS,
BR21/361/HS
62
REVERSIBLE Motor
MODEL
.
MOTOR
CONFIGURATIONS
TYPE
If SMARTY/EMA is installed, set
NB: the position data request message
then repeat the acquisition procedure (see chap. 11.2).
Set and
NB: the position data request message
then repeat the acquisition procedure (see chap. 11.2).
Set and
NB: the position data request message
then repeat the acquisition procedure (see chap. 11.2).
If SMARTY/EMA is installed, set
NB: the position data request message
then repeat the acquisition procedure (see chap. 11.2).
appears
appears on the display,
appears
appears on the display,
appears
appears on the display,
appears
appears on the display,