Publicité
Les langues disponibles
Les langues disponibles
4
Updates of version P4.30
1. Improved inverter management for High Speed motors
2. Added the management of the IP device B74/BCONNECT controllable via browser device Roger BCONNECT, for the
is possible in proximity of the installation of the automation with access point functionality directly provided by B74/
BCONNECT (point to point connection) or through the registration and the activation to the cloud Roger Technology
with the possibility to manage all the functions of the central unit remotely via web browser.
3.
4. Addition of "remote assistance" mode and automation management with "emergency functionality" enabled and
managed by web browser.
5. Added par.
to time reclosing after partial opening.
6. Also enabled the PED command to perform position recovery.
7.
5
Technical characteristics of product
MAINS POWER VOLTAGE
MAXIMUM MAINS POWER ABSORPTION
INRUSH POWER
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
MAXIMUM MOTOR POWER
MAXIMUM POWER, FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
ELECTRIC LOCK POWER
MAXIMUM ACCESSORY CURRENT ABSORPTION
OPERATING TEMPERATURE
DEGREE OF PROTECTION
PRODUCT DIMENSION
The device to be connected must therefore be able to withstand a maximum voltage of 40
The total of the absorption values of all the accessories connected must not exceed the maximum power
values shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
and
EDGE1/BOX
230 W
600 W
F1 = 20A (ATO257) motor power circuit protection.
F2
F3 = 3A (ATO257) accessories power supply protection
F4 = T2A (5x20 mm) primary transformer coil protection
2
sinusoidal drive brushless (ROGER BRUSHLESS)
60 W
250 W
)
(medium voltage) (*)
20 W 24
(750 mA)
IP54
nominal (max 40
to value 12)
EDGE1/115/BOX
(potential free contact)
.
55
Publicité
