Corghi EM 9380 XLine Manuel D'utilisation page 90

- User-friendly graphics for fast and effective learning of the machine functions.
- Keypad with a reduced number of keys for data entry and programme selection.
- On-screen interactive help.
- Multi-language texts
- Microprocessor processing unit (32 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making the machine easy to use.
- Unbalance value display in grams or ounces.
- Unbalance display rounding-off setting.
- Balancing modes available:
• Standard
• Alu / Alu P
• Motorcycle Dynamic
• Motorcycle ALU
on a single side.
• Static
- "Shift planes" programme (in Alu P) for using multiple five gram weights, i.e.: available
without the need for partial cuts.
- "Hidden Weight" programme (in Alu P) in order to divide the outer side balancing
adhesive weights into two equal weights positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle programmes) to divide the weight into two
equivalent values to be placed on either side of the spoke.
- "OPT flash" programme for rapid optimisation of operating noise reduction.
- "FSP" (Fast Selection Program) programme for the automatic selection of the balancing
programme.
- General utility programmes:
• independent calibration of the machine's components;
• main screen customisation;
• spin overall and partial number counter;
• selection of the 2 most used programmes;
• visualisation of the service and diagnostics page.
- Independent working environments that allow a maximum of three operators to work
in parallel with no need to reset any data.
- RPA: - Automatic wheel positioning in the position where the balancing weight has to
be applied.
- Possibility to select the position for applying the adhesive weight:
- Vertical plane in the lower part of the wheel (H6) using the LASER line.
• Vertical plane in the upper part of the wheel (H12)
• CLIP: using the weight-holder terminal in the ALUP balancing programmes (in all the
other H12 balancing programmes)
- LED light
- LASER indicator
90
dynamic on both rim sides
seven different routines for alloy rims
on both sides of motorcycle rims
dynamic on both sides of alloy motorcycle rims
Operator's Manual EM 9380 XLine - EM 9380C XLine