Corghi EM 9380 XLine Manuel D'utilisation page 79

Handling and manoeuvring after installation
The machine may be handled and manoeuvred after installation as follows:
• Disconnect the power cable from the socket
• Remove the plug in one of the trays of the weight holder cover
• Screw the eye-bolt supplied completely onto the threaded pin in the hole
• Lift the machine with a hoisting hook suitable for the weight of the machine, applied to
the specific eye-bolt fixed to the machine for lifting as illustrated in figure 2a
• Move the machine as required and set down on the floor
• Detach the hoisting hook from the machine
• Remove the eye-bolt, then refit the plug removed previously from the weight tray cover
2a
UK
CAUTION
When moving the machine, do not use:
- the wheel shaft
- the weight tray
- the display head as a gripping point.
Operator's Manual EM 9380 XLine - EM 9380C XLine 79