Corghi EM 9380 XLine Manuel D'utilisation page 78

Handling for installation
The machine may be handled and manoeuvred for installation as follows:
• Remove the three brackets anchoring the machine to the pallet
• Lift the machine with a hoisting hook for the weight of the machine, applied to the
specific eye-bolt fixed to the machine for lifting as illustrated in figure 2
• Move the machine into the desired position and set down on the floor
• Detach the hoisting hook from the machine
• Remove the eye-bolt, then fit the specific plug supplied in the hole.
2
CAUTION
When moving the machine, do not use:
- the wheel shaft
- the weight tray
- the display head as a gripping point.
78 Operator's Manual EM 9380 XLine - EM 9380C XLine