Corghi EM 9380 XLine Manuel D'utilisation page 119

Weight Management is a suite containing 4 programmes:
1. Hidden Weight
2. Split Weight
3. OPT flash
4. Less Weight.
Note: the Hidden Weight, Split Weight and OPT Flash programmes are available even when
Weight Management is not enabled.
To access this suite you must:
• select the Utility programmes icon,
• select the Weight Management icon.
In this way you will access the main screen of Weight Management, showing 4 icons:
the OPT Flash icon for the unbalance minimisation programme,
1.
2. the Balancing programme icon that unites all the available balancing programmes,
the Statistics icon, which visualises the statistics relating to the use of the Less Weight
3.
programme,
4. the Less Weight icon for the slow or fast vehicles weight savings programmes.
If programme ALU 1P or ALU 2P has been set to "auto" mode, the Hidden weight icon will also
appear, while if the programme ALU MOTO has been set in "motorcycle" mode, the Divide
side weight icon will appear.
Note: for Balancing programmes refer to the BALANCING PROGRAMMES paragraph.
Note: for the using the OPT Flash programme, see the paragraph OPTIMISATION PRO-
GRAMME (OPT FLASH).
Weight savings programme (Less Weight)
This programme allows you to obtain the optimum balancing of the wheel, reducing the
quantity of weight to be applied to a minimum.
To access this programme you must:
• select the Utility programmes icon,
• select the Weight Management icon.
In this way you will access the main screen of Weight Management, and the unbalance values
visualised will be automatically updated.
Selecting the Less Weight icon, it is possible to choose between 2 different weight savings
programmes:
• optimised programme for fast vehicle wheels,
• optimised programme for slow vehicle wheels.
The status bar of the displayed screen will show:
the Fast wheel icon, if the programme for fast vehicle wheels has been selected
•
• the Slow wheel icon, if the programme for slow vehicle wheels has been selected.
Note: each time the machine is switched on, if the Weight Management suite has been
activated, the Fast wheel programme is automatically set.
At this point it is possible to perform the wheel balancing, using the required balancing
programme.
At the end of the spin, if the wheel balancing is not satisfactory, a screen will display the values
of the weights to be applied to the inner and outer sides of the rim.
Operator's Manual EM 9380 XLine - EM 9380C XLine
WEIGHT MANAGEMENT SUITE
UK
119