Corghi EM 9380 XLine Manuel D'utilisation page 127

Enables/disables the Optimisation programme warning at the end of the spin. After the
list of the setting programmes is displayed, proceed as follows:
- Select the Enable/Disable OPT warning icon
The following icons are displayed:
OPT OFF; deactivates the OPT warning.
OPT ON; activates the OPT warning;
- Press the Enter button to select the icon desired
- Press the Exit button to save the setting and exit
The selection can also be seen in the working screen status line.
Preferred programme configuration
Allows two preferred icons to be set on the main icon bar.
After the list of the configuration programmes is displayed, proceed as follows:
- Select the preferred programmes icon
- All the utility and balancing programmes icons are displayed.
- Select the two programmes to be displayed in the main window by using the Enter
button .
- Press the Exit button to save the setting and exit
The language of the messages displayed on the monitor can be selected.
After the list of the setting programmes is displayed:
- Select the language setting
- A list of flags is displayed. Select the flag corresponding to the desired language by
pressing the Enter
Operator's Manual EM 9380 XLine - EM 9380C XLine
OPT warning configuration
Language configuration
icon.
button
.
.
.
.
.
UK
127