Télécharger Imprimer la page

moovo MD432KM Instructions Et Avertissements Pour L'installation Et L'utilisation page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

19. measure the desired distance "B", which will define how far the
gearmotor will be from the ceiling, and cut the two ceiling-mounted
brackets (Q) to size
20. use two screws to fasten the ceiling mounting brackets (Q) while
observing the desired distance ("Fig. 22")
22
21. using a ladder, lift the gearmotor until the brackets touch the ceiling
22. mark the drilling points and then put the gearmotor back on the
ground ("Fig. 23")
23
23. drill through the marked points
Q
B
24. using a ladder, lift the gearmotor until the brackets rest against the
drilled holes
25. fasten them using screws and plugs suited to the relevant material
("Fig. 24")
24
26. assemble the unlocking system (S) by tightening the screw (V) and
placing the spring washer (R) in between ("Fig. 25")
25
S
V
27. fasten the cord (C) and the relevant unlocking ball to the unlocking
system (S)
28. with the door closed, pull the cord (C) to detach the carriage ("Fig. 26")
26
R
S
C
13
13

Publicité

loading