Parts Required; 11. Mounting Door Grease Shield - Pit Boss PBV2G1 Mode D'emploi

9. ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY

Parts Required:

6 x Cooking Grid Support (#5)
1 x Upper Smoker Cabinet Assembly (#2)
Installation:
• Assemble three Cooking Grid Supports
(#5) in the holes in the left side of the
smoker. Repeat the procedure for the right
side making sure the Cooking Grid Support
(#2) on the left side and right side are at the
same height as Fig.9.1 & Fig. 9.2 shown, so
the Cooking Grids are level.
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
3 x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place three Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.

11. MOUNTING DOOR GREASE SHIELD

TO THE DOOR ASSEMBLY
Parts Required:
1 x Door Grease Shield (#26)
1 X Door Assembly (#10)
5 x #8-32 Self-tapping Screw (#G)
Installation:
• Attach the Door Grease Shield (#26) to the
Door Assembly (#10) using 5 x #8-32 Self-
tapping Screw (#G) as Fig.11 shown.
13
Fig.9.1
Fig.9.2
Fig.10.1
#4
#15
Fig.10.2
Fig.11
#16
#26