Mectron Piezosurgery plus Mode D'emploi Et D'entretien page 41

5 MAINTENANCE
If the device is not used for a long time, proceed as follows:
1. Disconnect the device from the mains;
2. In case of a long period of inactivity,
place the device in its original
packaging and in a safe area;
3. Before using the device again, clean and
sterilise the handpiece and the wrench
6 DISPOSAL METHOD AND PRECAUTIONS
WARNING: Hospital waste.
Treat the following items as hospital waste:
• Sterile inserts after each intervention;
• Sterile irrigation kit after each
intervention;
• Torque wrench, dispose of when
worn or broken.
Disposable materials and materials that imply
a biological risk must be disposed of in
accordance with current local regulations
7 TECHNICAL DATA
Device compliant with Regulation (EU)
2017/745
Classification as per IEC/EN 60601-1
Foot Pedal
Essential performance
Device for intermittent operation
Power supply voltage
Max. power consumption
Fuses
MAINTENANCE
according to the instructions provided
in the Cleaning and Sterilisation Manual.
WARNING: Regularly check that the
power supply cord is in good condition. If
damaged, replace it with an original Mectron
spare part.
governing hospital waste.
The PIEZOSURGERY plus must be disposed
®
of and treated as a waste requiring separate
collection.
The customer is entitled to deliver the old
device for disposal to the retailer supplying
the new equipment. Instructions on correct
disposal are available from Mectron.
Non-compliance with the previous points may
produce a fine in accordance with the Waste
Electrical and Electronic Equipment (WEEE)
Directive.
Class IIa
I
Applied part: type B (insert)
IP 20 (device)
FS-08 Model
IPx8
"ON/OFF" type
Cable length: 2,80m
According to the standard IEC 80601-2-60
the device has no essential performance
50 sec. ON - 60 sec. OFF with irrigation
100-240 V~ 50/60 Hz
250 VA
Type 5 x 20 mm, T 5AL, 250V
33