Mectron Piezosurgery plus Mode D'emploi Et D'entretien page 16

2 IDENTIFICATION DATA
A precise description of the model and device
serial number will facilitate the After-Sales
Service to answer the inquiries quickly and
effectively.
2.1 Device Identification Label
Each device has its own identification
label showing its
specifications and the serial number.
This identification label is placed on the
rear side of the device. The complete
technical specifications are reported in
Chapter 7 on page 33 .
Each device has its own identification label
showing its main technical specifications
and the A separate label shows further
symbols and characteristics of the device.
This identification label is placed under
the device.
NOTE: The complete list of symbols and
their description are shown in
1.5 on page 6 .
2.2 Handpiece Identification Data
Each handpiece is laser-marked with (refer to
Figure 1 at page 9 ):
• its serial number (SN);
• its product number (REF);
• its date of manufacturing;
• the device name (PIEZOSURGERY®
medical o PIEZOSURGERY® medical +);
• the Mectron logo;
• HIBC 128 Data Matrix;
• CE, MD, Applied Part and Sterilizable
symbols.
8
main technical
Chapter
Always provide this
contacting an Authorised Mectron Service
Centre.
PIEZOSURGERY plus
~
100-240 V 250 VA - 50/60 Hz.
04000102
420000000
HIBC 128 Bar Code
PIEZOSURGERY plus
Device for intermittent operation:
50 s ON - 60 s OFF with irrigation
NOTE: The complete list of symbols and their
description are shown in
6.
information when
manufacturer
Mectron S.p.A.
Via Loreto 15/A
16042 Carasco -GE- Italy
0051
YYYY-MM-DD
made in Italy
Chapter 1.5 on page