Publicité
Les langues disponibles
Les langues disponibles
4.7
Disconnection of the Handpieces from the Device
To disconnect the connector of the cord-
handpiece from channel 1 (CH1), simply grasp
the connector firmly and pull it out.
CAUTION: To avoid damaging the cord-
handpiece, connect and/or disconnect it,
holding it by the connector only. Never pull
the cord.
The
cord-handpiece
channel 2 (CH2) is equipped with a
retention mechanism.
To unlock the retention mechanism, pull
the outer sleeve and then pull out the
connector.
CAUTION: To avoid damaging
the cord-handpiece, connect and/or
disconnect it, holding it by the connector
only. Never pull the cord.
18
1
connector
for
To disconnect the connector of the cord-
handpiece from channel 2 (CH2), instead,
proceed as follow:
CH 2
Publicité
