Siemens SINAMICS G120 Mode D'emploi page 618

<1> PZD receive word 1
<2> PZD receive word 2
Fieldbus
PZD receive word 3
PZD receive word 4
Receive telegram
PZD receive word 5
PZD receive word 6
PZD receive word 7
PZD receive word 8
PZD receive word 9
PZD receive word 10
PZD receive word 11
PZD receive word 12
<1> The receive word 1 must be used as control word (STW1) (due to bit 10 "control requested").
<2> The preconfiguration with the speed setpoint is set automatically via p1000 = 6.
<3> Using the connector-binector converters, the bits can be extracted from two of the PZD receive words 3 to 8 and used as binectors.
<4> The following representation applies for words: 4000 hex = 100 %.
The reference variables p200x apply for the ongoing interconnection (100 % -> p200x).
The following applies for temperature values: 100 °C -> 100 % = 4000 hex, 0 °C -> 0 %.
1 2
Fieldbus Interface (USS, Modbus, BACnet)
Receive telegram, free interconnection via BICO (p0922 = 999)
r2050 [0]
r2050 [1]
r2050 [2]
r2050 [3]
PZD recv word
r2050 [4]
PZD recv word
r2050 [5]
PZD recv word
r2050 [6]
PZD recv word
r2050 [7]
PZD recv word
r2050 [8]
PZD recv word
r2050 [9]
PZD recv word
r2050 [10]
PZD recv word
r2050 [11]
<4>
Reference quantities for further
interconnection
p200x
3 4
r2090.0
r2090.15
PZD recv word
r2091.0
r2091.15
PZD recv word
r2092.0
r2092.15
PZD recv word
r2093.0
r2093.15
PZD recv word
2 connector-binector converter
<3>
Con/bin S_src
p2099 [0]
(0)
<3>
Con/bin S_src
p2099 [1]
(0)
5 6
fp_9360_97_52.vsd
13.03.2018 V4.7_10
...
PZD1 recv bitw
PZD1 recv bitw
... PZD2 recv bitw
PZD2 recv bitw
... PZD3 recv bitw
PZD3 recv bitw
...
PZD4 recv bitw
PZD4 recv bitw
Con/bin outp inv
p2098[0].0
0 Con/bin outp
r2094 .0
1
1
Con/bin outp inv
p2098 [0].15
0
Con/bin outp
r2094.15
1
1
Con/bin outp inv
p2098 [1].0
0
Con/bin outp
r2095.0
1
1
Con/bin outp inv
p2098 [1].15
0
Con/bin outp
r2095.15
1
1
7 8
Function diagram
- 9360 -
CU230P-2 BT/HVAC