Setting The Timer; Manual Cooking Programs - Franke Crystal CR 982 M Manuel D'utilisation

The oven calculates the start time based on the chosen
cooking time or cooking program and the preset end
time. Cooking will start at the calculated start time.
It is possible to set an end time for cooking only in the
section MANUAL and in the section RECIPES of AUTO,
ECO COOKING and WELLNESS.

Setting the timer

The timer can be used in all cooking modes, it is
independent from any function.
In manual cooking mode
Turn to enter the list of manual cooking programs
X X
Turn to choose a program.
X X
Press for 2 seconds.
X X

MANUAL COOKING PROGRAMS

Program Description
GENTLE HEAT
The set temperature is 100°C with the inside cooling fan switched on for cooking
at low power (1000 Watts).
Cooking times are elongated which allows a very delicate and uniform cooking
(e.g., cooking type „wellness"). This function is suitable for preheating the oven
before inserting the prepared food.
DEFROSTING
The set temperature is 25°C with the inside cooling fan switched on.
This function is suitable for defrosting food slowly or to cool the oven down after
cooking.
DOUGH RESTING
The set temperature is 30°C with the inside cooling fan switched off. This creates
the ideal conditions for dough to rise.
PLATE WARMING
The set temperature is between 35°C and 55°C. This function is suitable for
warming cooked but cold food or for keeping plates or food warm without
affecting the cooking.
LOW TEMPERATURE
The low temperature function is ideal to cook food at low temperature for a
longer time, in order to preserve tenderness and organoleptic properties.
You can cook meat, fish and vegetables, keeping the original flavor and nutritional
values.
CR 982 M
The sub
„ „
menu view
appears.
Turn to select
X X
Choose hours and minutes by turning and pressing
X X
for 2 seconds.
The timer runs in the background at the top
„ „
right corner.
Turn to select
X X
When finished, you hear a sound
„ „
To stop the sound press OK.
X X
– 15 –
and press .
and press to confirm.
.
Knob / Position
1
1
Select
X X
temperature
with .
1
Select
X X
temperature
with .
1
Select
X X
temperature
with .
1
Select
X X
temperature
(from 60°C up
to 100°C) with
.
EN