Scheduling An End Time For Cooking; Setting The Alarm; Meat Probe Use; Connection - Franke CRYSTAL CR 913 M Manuel D'utilisation

Press to confirm.
X X
Place the prepared food in the oven cavity and close
X X
the oven door.
Press to confirm.
X X
Select start cooking to confirm the program or
X X
select end time to set delay time.
Press and the cooking program starts.
„ „
To stop the program:
Press and hold or press briefly
X X
The details of the recipes (ingredients and
preparation) are available on our web site:
– http://recipes.franke.com

Scheduling an end time for cooking

In manual cooking mode
Press to enter the main menu.
X X
Select and press
X X
The menu MANUAL with different sections
„ „
appears, choose a function.
Choose cooking duration.
X X
Press to confirm.
X X
The sub
„ „
menu view
appears.
Select and press
X X
Choose hours and minutes by scrolling through the
X X
vertical menu.
Confirm with .
X X
The oven is now in standby mode.
„ „

MEAT PROBE USE

The meat probe supplied with your Franke oven allows you
to cook meat and be sure that the cooking process will be
interrupted at the right moment, i.e. when the measured
core temperature of the meat corresponds to the ideal
cooking. In this way it will no longer be necessary to set
cooking times and repeatedly check the meat.
The meat probe cannot be activated in cooking modes
(GRILL, FAN GRILL) or in any pre-set cooking recipes.
Caution!
Only use the temperature probe recommended for
Z X
this oven.
All manuals and user guides at all-guides.com
and select
.
.
CR 913 M
The oven calculates the start time based on the chosen
cooking time or cooking program and the preset end
time. Cooking will start at the calculated start time.
It is possible to set an end time for cooking only in the
section MANUAL and in the section RECIPES of AUTO,
ECO COOKING and WELLNESS.

Setting the alarm

The timer can be used in all cooking modes, it is
.
independent from any function.
Press to enter the main menu.
X X
Select and press
X X
The menu MANUAL with different sections appears.
X X
Choose a function.
X X
Press to confirm.
X X
The sub
„ „
menu view
appears.
Select and press
X X
Choose hours and minutes by scrolling through the
X X
vertical menu.
Press to confirm.
X X
Select start cooking and press
X X
The timer runs in the background on the primary
„ „
menu bar near the clock.
When finished, you hear a sound.
To stop the sound press
X X

Connection

It is advisable to connect the probe jack before starting
cooking and with the oven cold, in order to avoid burns.
Make sure the jack is fitted properly in the connector, to
X X
ensure stability and a correct meat temperature reading.
,
– 15 –
.
.
.
.
EN