Setting The Minute Minder - Franke SMART GN 86 M H XS Manuel D'installation Et Mode D'emploi

EN
It is an electronic timing module enabling your
food you have put in the oven to be ready for
service at any time you like. The only thing you
need to do is to programme the cooking time
of the food and also the time when you would
like your food to be ready.
It is also possible to use a minute-programmed
alarm clock independent from the oven.
The case where the time clock is behind or
ahead is not a malfunction. The oven time
clock may be put back or ahead according to
mains frequency as it runs directly with mains
voltage. This is not a malfunction.
Power on
At power on, oven is inactive, time of day and
symbols are flashing.
„ „
The indicated time of day is not correct
and has to be adjusted.
X Z
Press
adjusting the time of day as below.
Time of day adjustment
Time of Day adjustment is only possible when
no cooking program is in progress.
X Z
Press
3 seconds to enter the adjustment mode
and then the dot symbol in between
hours and minutes digits will start to
flash. Using either
desired duration. The maximum adjustable
duration is 23h 59 minutes.
Adjustment mode will be abandoned within
6 seconds after the last button press or
can be terminated immediately by pressing
the button.
Note: Time of Day adjustment is also activated
in first 7 seconds after power on.
Setting the minute minder
With this function, you can adjust a duration in
minutes.
„ „
After the adjusted time has been elapsed,
an alarm sound will be produced.
X Z
Press
minder adjustment mode,
start flashing on the screen.
GN 86 M H XS / GN 86 M H BK / GN 86 M H WH
to activate the oven and proceed
and simultaneously for
and adjust the
button once to enter the minute
symbol will
X Z
Using either
duration. The maximum adjustable
duration is 10 hour. Adjustment mode will
be abandoned within 6 seconds after the
last button press or can be terminated
immediately by pressing the
Cancelling the alarm buzzer sound
„ „
Once the adjusted minute minder
duration is elapsed, the buzzer alarm
will start to sound, accompanied by
the flashing
„ „
Any button press will stop the alarm
sound and this indication.
„ „
If no button is pressed, the alarm sound
will end automatically after 5 minutes,
but the flashing symbol will go on.
Semi automatic cooking
This cooking program is intented to start
cooking immediately for a specified duration.
After the oven is set to the desired function
and Temperature via the oven knobs:
X Z
Press the
flash on the screen.
of cooking will show on the screen one
after another.
X Z
Using or
cooking duration.
X Z
After 6 seconds of the last button press
or by pressing
is completed.
screen and the display shows the current
time of day.
Full automatic cooking
This cooking program is intented to perform
a delayed cooking by programming the time of
day, when the food should be ready.
In other words, the oven will start cooking not
immediately but will automatically calculate the
time to start cooking.
X Z
Perform step 1 and 2 of the semi auto
cooking as above.
(cooking duration adjustment).
X Z
Press button once again,
will flash on the screen and duration
of cooking will show on the screen one
after another.
– 12 –
or , adjust the desired
button.
symbol on the screen.
button twice, symbol will
and duration
buttons, adjust the desired
twice, the adjustment
will be steady on the
symbol