Proper Use; Maintenance And Cleaning; Repair; Taking Out Of Service - Franke Crystal CR 982 M Manuel D'utilisation

Masquer les pouces Voir aussi pour Crystal CR 982 M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Proper use

Only use the oven to prepare and cook food.
Z
X
Use oven gloves when placing containers in the
Z
X
oven or when taking containers out of the oven.
Observe only the manuals that are used with the
Z
X
oven when it is in function.
Do not place power cables of other electric
Z
X
appliances on hot parts of the oven.
Do not use the oven cavity to store any objects.
Z
X
Do not use flammable liquids near the oven.
Z
X
Only use the temperature probe recommended
Z
X
for this oven.
Risk of overheating and malfunction of the
oven due to blocked ventilation!
Never cover the inside walls of the oven with
Z
X
aluminium foil, especially the lower part of the
oven cavity.
Do not block the ventilation of the fan or the
Z
X
cooling openings above the oven door.
Damage to the enamel in the oven due to
wrong handling of pots or containers!
During cooking, never place pots or containers
Z
X
directly on the floor of the oven cavity.
Place pots and containers only on the racks or
Z
X
enamel trays provided on one of the five shelves
available in the oven cavity.
Risk of burns!
The oven and its accessible parts become very hot
during use.
Do not to touch the heating elements inside the
Z
X
oven.
Risk of burns!
The end of the door handle may be hotter due to hot
air being vented.
When opening or closing the door, always hold the
Z
X
door handle in the middle.
Always make sure that the control knobs are in
Z
X
the off position when the oven is not in use.
Risk of electric shock due to damaged device!
Do not switch on a damaged device.
Z
X
Switch off the fuse in the fuse box.
Z
X
Contact the customer service.
Z
X
CR 982 M
Risk of electric shock!
Do not touch the device with wet parts of your body.
Z
X
Do not use the device when barefoot.
Z
X
Do not pull on the device or power cable to
Z
X
unplug it from the socket.

Maintenance and cleaning

Before maintenance or cleaning:
Disconnect the device from the power supply,
Z
X
e.g., switch off the fuse in the fuse box.
The oven uses a special enamel which is easy to
keep clean. However, Franke recommends to clean
it frequently in order to avoid baking on grime and
previous cooking residues.
Do not use coarse abrasive materials or sharp
Z
X
metal scrapers to clean the glass parts of the
oven door, as they could scratch the surface and
cause the glass to shatter.
Do not use steam cleaners or direct jets of water.
Z
X
Risk of electric shock due to entering
liquid!
The device contains electrical components.
Make sure that no liquid enters the interior of the
Z
X
device.
Do not use pressurised steam to clean the device.
Z
X
Do not use a wet cloth to clean the operating
Z
X
elements.

Repair

Do not allow anyone except qualified personnel to
Z
X
install or repair the appliance.
Contact a service centre authorised by the
Z
X
manufacturer or qualified personnel in the
following cases:
– Immediately after unpacking, in the event of
doubts regarding the integrity of the device
– During installation (according to the
manufacturer's instructions)
– Doubts regarding the correct operation of the device
– Malfunction or poor operation
– Replacing the power socket if incompatible with
the power plug of the device
– Damage to the power cable or need of replacing
the power cord or plug

Taking out of service

If the oven is no longer to be used, call the service
Z
X
centre or qualified personnel to disconnect it from
the power supply.
– 7 –
EN

Publicité

Table des Matières
loading

Table des Matières