Switching On The First Time; Configuring The Display; Operation; Cooking In Manual Mode - Franke Crystal CR 982 M Manuel D'utilisation

EN

SWITCHING ON THE FIRST TIME

When using the oven for the first time:
Open the front door and ensure that the oven cavity
X X
is empty. Remove all accessories and close the oven
door.
Ensure that the room is well aired, e.g., open the
X X
doors and windows.
Press to start the oven.
X X
After starting, clock time is displayed, press
„ „
again, then the main view appears.
Select and press
X X
right to select the program MULTICOOKING
Turn
X X
in the FUNCTION section.

CONFIGURING THE DISPLAY

This chapter explains how to set up your display features
according to your preferences.
Starting the configuration
Press to enter the main menu.
X X
Turn right to select
X X
The SETUP menu appears and shows different
„ „
options.
Configuring the time
, select TIME and press
Turn
X X
Choose hours, minutes and seconds by turning and
X X
pressing .
The clock will switch off automatically after a few
„ „
hours due to display pixel safety.
Configuring the language
Select LANGUAGE and press
X X
Choose your language by turning the
X X
through the list.
Press to confirm the chosen language.
X X

OPERATION

For best use of your Franke oven, consult the cooking
X X
table.

Cooking in manual mode

In manual mode you are cooking by setting a program, the
temperature and duration according to your preferences.
Turn to enter the list of manual cooking programs.
X X
The menu MANUAL with different sections
„ „
appears:
.
and press .
.
.
and scrolling
CR 982 M
In the TEMPERATURE section, select the maximum
X X
temperature (270°C).
In the DURATION section, select 00 h 40 m .
X X
Press to enter sub menu, press
X X
confirm and start cooking mode
Operate the oven while empty at maximum
X X
temperature with the door completely closed.
The odour detectable during this operation results from
the evaporation of substances used to protect the
oven during the time between manufacture and actual
installation.
After the 40 minutes, the oven stops automatically and will
be ready for use after cooling down the oven.
Configuring the display brightness
Select DISPLAY BRIGHTNESS and press
X X
Set the brightness of the control panel by turning the
X X
and selecting one of the segments of the bar.
Press to confirm the chosen brightness.
X X
Configuring the volume of the alarm tone
Select SOUND and press
X X
Set the volume by turning the
X X
of the segments of the bar.
Press to confirm the chosen volume.
X X
Configuring the clock display type
Select CLOCK DISPLAY TYPE and press
X X
Select your favourite skin: analogue clock or digital
X X
clock.
Press to confirm the chosen skin.
X X
Finishing the configuration
To exit the configuration select
X X
times and you will find yourself on the stand by
Section
FUNCTION
TEMPERATURE
DURATION
– 12 –
again to
.
.
and selecting one
pressing it two
Description
Select from different programs (see
chapter Manual Cooking Programs)
Select the required temperature
from min. 50°C up to max. 270°C
(in program GENTLE HEAT: 230°C)
Select the duration in hours and
minutes
.
.
menu.