Technical Data; Product Identification - Franke Crystal CR 982 M Manuel D'utilisation

EN

TECHNICAL DATA

Product identification

Type: OE-9D
Model: CR 982 M BK DCT TFT
Refer to the data plate placed
X X
on the product.
This appliance complies with the following EC Directives:
– 2006/95/EC (Low Voltage)
– 2004/108 EEC (Electromagnetic Compatibility)
The energy efficiency class (according to 2009/60350-
50304/EN) is determined by operating modes: Energy
Saving and Statics.
To calculate the volume, if present, remove the inner side
of the guide wire (according to regulations 2009/60350-
50304/EN).
Parameter
Model identification
Oven type
Appliance weight
Number of cavities
Heat source of each cavity
Volume of each cavity
Energy consumption required to heat a standard
load in a cavity of an electric oven during a cycle in
convection mode for each cavity
Energy consumption required to heat a standard load
in a cavity of an electric oven during a cycle in forced
air circulation mode for each cavity
Energy efficiency ratio for each cavity
The manufacturer provides continuously product
enhancements. For this reason, the text and the
illustrations in this manual may be changed without notice.
Further information on technical data is available on:
www.franke.com
CR 982 M
Parameter
Working dimensions
of the oven (mm)
Power supply voltage
and frequency
Total power and fuse rating
Power and heating element values
Radial motor
Light bulb
Tangential fan
Roof
Floor
Grill
DCT heating elements
Symbol
FS-CR
M
V
EC electric cavity
EC electric cavity
EEI cavity
– 32 –
Value
480 x 370 x 405
(W x H x D)
220-240 V, 50/60 Hz
2900 W, 16 A
27 ... 40 W
40 W (2x)
15 ... 35 W
520 W / 124 V
1250 W
2100 W
2650 W
Value Unit of measure
913-982 DCT
built-in
41 kg
1
electric
74 l
1.12 kWh/cycle
0.53 kWh/cycle
61