Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
SWITCHING ON THE FIRST TIME
When using the oven for the first time:
Open the front door and ensure that the oven cavity is
X
X
empty. Remove all accessories.
Ensure that the room is well aired, e.g., open the
X
X
doors and windows.
Press
to start the oven.
X
X
After starting, the clock appears.
Press
to enter the main menu.
X
X
Press
.
X
X
In the FUNCTION section select the program
X
X
MULTICOOKING by pressing
In the TEMPERATURE section, select the maximum
X
X
temperature (270°C) by pressing
to choose the temperature.
CONFIGURING THE DISPLAY
This chapter explains how to set up your display features
according to your preferences.
Starting the configuration
Press
to start the oven.
X
X
Press
to enter the main menu.
X
X
Press
to select
X
X
Press
.
X
X
The SETUP menu with different options appears.
„
„
Configuring the time
Select TIME.
X
X
Press
.
X
X
Choose hours, minutes and seconds by scrolling
X
X
through the list and press
The clock will switch off automatically after a few
„
„
hours due to display pixel safety.
OPERATION
For best use of your Franke oven, consult the cooking
X
X
table.
Cooking in manual mode
In manual mode you are cooking by setting a program,
the temperature and duration according to your
preferences.
.
and pressing
.
.
CR 913 M
In the DURATION section, select 00 h 40 m (move
X
X
right by pressing
Press
to start the manual function.
X
X
Press
to confirm function.
X
X
Choose not to activate the preheating
X
X
Operate the oven while empty at maximum
X
X
temperature with the door completely closed.
The odour detectable during this operation results from
the evaporation of substances used to protect the
oven during the time between manufacture and actual
installation.
After the 40 minutes, the oven stops automatically and
will be ready for use.
Configuring the language
Select LANGUAGE.
X
X
Choose your language by scrolling through the list and
X
X
press
.
Configuring the display brightness
Select DISPLAY BRIGHTNESS.
X
X
Set the brightness of the control panel by selecting
X
X
one of the segments of the bar and press
Configuring the volume of the alarm tone
Select SOUND.
X
X
Set the volume by selecting one of the segments of
X
X
the list and press
Configuring the clock display type
Select CLOCK DISPLAY TYPE.
X
X
Select your favourite skin: analogue clock or digital
X
X
clock and press
Finishing the configuration
To return to the main menu, press
X
X
Press
to enter the main menu.
X
X
Select
and press
X
X
The menu MANUAL with different sections
„
„
appears:
– 12 –
, to select duration press
.
NO
.
.
twice.
.
).
.
Publicité
Chapitres
Table des Matières
