Adjusting The Aileron Deflection (Only Item No. 233770) - Reely Cessna 182 RTF Notice D'emploi

c) Adjusting the Aileron Deflection (only Item No. 233770)
• First, take up operation of the transmitter, if
you have not done so, and then turn on the
model.
• The trim lever for the aileron function (see
figure 2, pos. 5) has to be in centre position. If
the linkage rods are adjusted correctly, the
ailerons (1) and the wing are in line (see figure
18a).
• If you push the right control stick on the
transmitter (see figure 2, pos. 4) to the left, the
left aileron (1) has to deflect by approx. 1.2 cm
upwards and the right aileron (2) by approx.
1.2 cm downwards (see figure 18b).
In flight this control operation pushes the left
half of the wing downwards and lifts up the
right half.
The model turns to the left around its longitu-
dinal axis.
• If you push the right control stick on the
transmitter (see figure 2, pos. 4) to the right,
the left aileron (1) has to deflect by approx. 1.2
cm downwards and the right aileron (2) by
approx. 1.2 cm upwards (see figure 18c).
In flight this control operation lifts up the left
half of the wing and pushes the right half
downwards.
The model turns to the right around its longi-
tudinal axis.
Figure 18a
Figure 18b
Figure 18c
65