Grease Points (Hydraulic Base) - Stryker CUB Pediatric Crib Manuel De Maintenance

GREASE POINTS (HYDRAULIC BASE)

1. Head and Foot End Brake Bar Rods
2. Head and Foot End Jack Springs
3. Head and Foot End Descent Valve Pins
Brake Bar Rods
1. Apply OG2 grease (p/n M0027) to Brake Bar Rod surface.
Jack Springs
and Descent Valve Pins
1. If dry, apply a thin layer of OG2 Grease (p/n M0027) to the Jack Springs.
2. Apply OG2 Grease (p/n M0027) to the Descent Valve Pins.
www.stryker.com
Preventive Maintenance
Head End
shown
Head End
shown
BOTH HEAD AND FOOT END
DESCENT VALVE PINS
1900-009-002 REV B
BOTH HEAD AND
FOOT END BRAKE
BAR RODS
BOTH HEAD
AND FOOT END
JACK SPRINGS
Return To Table of Contents
1-23