Electrical Output Specifications When Running On Mains Power; Electrical Output Specifications When Running On Battery Power - LEGRAND Megaline Rack Mode D'emploi Pour L'utilisateur

5. Specifications
5.5

Electrical output specifications when running on mains power

Nominal output voltage
Nominal output frequency
Output current with linear load
and power factor 0,7
Crest factor on output current
Nominal output power VA
Active output power with linear
or non-linear load P.F. 0,7
Total harmonic distortion of output voltage
with nominal load
Total harmonic distortion of output voltage
with nominal non-linear load P.F.0,7
Overload capacity
Number of output phases
AC-AC conversion efficiency with linear load
PF = 1 and charged batteries:
• with 50% load
• with 75% load
• with 100% load
5.6

Electrical output specifications when running on battery power

Nominal output voltage
Output frequency
Nominal output power VA
Active output power with linear
or non-linear load P.F. 0,7
Total harmonic distortion of output voltage
Overload capacity
Tolerated power factor range of applied load
DC-AC conversion efficiency with linear load
P.F. 1 and charged batteries:
• with 50% load
• with 75% load
• with 100% load
ATTENTION
There is a danger of explosion should the batteries be replaced with the wrong type.
Dispose of used batteries as per the instructions and precautions for their disposal on the battery label!
50
®
3 103 38
50 Hz / 60Hz synchronised (autosensing and/or as selected by operator)
5,37A rms
1250VA
875W
3 103 38
50 Hz / 60Hz ± 1% (autosensing and/or as selected by operator)
1250VA
875W
3 103 39
230 V ± 1%
10,75A rms
3,5
2500VA
1750W
< 0,5%
< 1%
300% for 1 second without By-pass intervention
200% for 5 seconds without By-pass intervention
150% for 30 seconds without By-pass intervention
Single phase
80%
85%
92%
3 103 39
230 V ± 1%
2500VA
1750W
< 1%
150% impulsive
from 0,7 to 1
80%
80%
80%
3 103 40 3 103 41
16,25A rms 21,6A rms
3750VA 5000VA
2625W 3500W
3 103 40 3 103 41
3750VA 5000VA
2625W 3500W