GRAUPNER JetCat P60 Instructions D'utilisation page 72

Alpha-numeric LCD screen, backlit,
2 lines, 16 characters
"+/-" buttons for leafing
through within a menu, and
for changing / setting values
Four function buttons for
direct menu selection
"Manual" button, activates
manual operating mode
"Standby" LED (yellow)
"Ignition" LED (red)
"Pump" LED (red)
"OK" LED (green)
"Change value" button for
changing an indicated value
or parameter
"Select menu" button for
selecting a menu
"Ignition" button, switches
on ignition (-> glowplug)
manually, also for testing /
activating the starter
[Seite 29]
Explanation of the operating buttons
Button
Info
Run
Limits
Min/Max
Select Menu
Change Value/Item
Meaning
Direct call-up of Info menu (hot key)
Direct call-up of Run menu (hot key)
Direct call-up of Limits menu (hot key)
Direct call-up of Min/Max menu (hot key)
If this button alone is pressed, the screen shows the currently selected menu. If
this button is held pressed in, another menu can be selected by pressing the +/-
buttons. Release the button when the menu you wish to see appears on the
screen.
If you press and hold this button, the value displayed on the screen can be
changed using the +/- buttons. The screen displays a small arrow before the value
if it can be changed by the operator. If the displayed value cannot be changed,
(e.g. current rotational speed or temperature) the information "Value/Item cannot
be changed" appears on the GSU screen.
27