Connections To The Turbine - GRAUPNER JetCat P60 Instructions D'utilisation

3. Open the gas bottle valve so that liquid gas flows into the propane tank.
4. Just before the gas flow ceases, turn the propane bottle the right way up again; any liquid gas still in the
hoses is now forced into the propane tank.
5. Close the valve on the propane bottle again.
6. Disconnect the propane bottle by releasing the quick-release coupling.
* Note:
Propane/butane gas has a powerful de-greasing effect, and that is why a few drops of silicone oil or similar
should always be applied to the female filler connector before filling. This prevents the internal O-rings drying
out, causing the quick-release coupling to leak. Some of the oil migrates into the gas valve, where it also
lubricates the valve components.
[Seite 15]

Connections to the turbine

Kraftstoffzufuhr
4 mm Schlauch
zur
Kraftstoffpumpe
Hilfsgasanschluss
(Propan / Butan)
3mm Schlauch
zum Gasventil
Kraftstoffzufuhr ...
Fuel feed
4 mm hose to
fuel pump
Hilfsgasanschluss ...
Auxiliary gas
Propane / butane
connection, 3 mm hose
to propane valve
Zur ECU
Temp & Rpm
Sensor
Anschluss
14
Zur ECU
(Glow-plug /
Starter device )
3-pol. Kabel