Set Up; Unpacking And Setting Up Your Balance - Adam Equipment CORE Série Mode D'emploi

EN
2.0 SET UP
2.1 UNPACKING
1) Remove the shipping protection screw and round cover as shown below using
the Allen key supplied in the plastic bag. (It is advisable to keep the shipping
protection screw and the round cover along with the packing box for using
during shipping to another location in future).
2) Place the pan (which comes separately packed) in the receptacles on the top
cover.
3) Place the stainless steel pan on top of the plastic pan.
4) Place the balance on a firm and flat surface for accurate weighing.
© Adam Equipment 2016
AND SETTING UP YOUR BALANCE
Shipping protection screw
Round cover around the screw
3
Gently place the plastic pan
support into the receptacle
and secure with the screw
supplied in the plastic bag.
Be careful when putting the
screw in that you do not
use too much force as it can
damaged the loadcell. You
should just be able to use
light force to secure the
screw.
308669539revB6-Mar17