Instructions De Nettoyage/D'entretien - Deltaplus HAR35TC GALAGO (EX320TC included) Notice D'utilisation

INSTRUCTIONS DE NETTOYAGE/D'ENTRETIEN :

Nettoyer à l'eau et au savon, essuyer avec un chiffon et suspendre dans un local aéré afin de laisser sécher naturellement et à distance de
tout feu direct ou source de chaleur, de même pour les éléments ayant pris l'humidité lors de leur utilisation.
Les parties métalliques seront essuyées avec un chiffon imbibé d'huile de vaseline. L'eau de javel et les détergents sont rigoureusement
prohibés.
MARQUAGE :
- Identification du fabricant : DELTAPLUS®
- date (mois/année) de fabrication, exemple 02/2015
- la référence du produit HA..., EX... (voir tableau des références).
- le numéro de lot, exemple 15.9999
- l'indication de conformité à la directive 89/686/CEE (pictogramme CE)
- le numéro de l'organisme notifié intervenant dans le contrôle de l'équipement (0082 ou 0333)
- le numéro de la norme à laquelle le produit est conforme et son année : EN...
- 2 zones libres permettant d'indiquer le nom de l'utilisateur et celui de sa société
- Points d'accrochage de l'équipement d'arrêt de chute : A, A/2
- Tailles : GT = S, M, L et XX = XL, XXL, XXXL
- 150 kg : charge nominale maximum / pour la ceinture à cuissardes (EN813) .
Ainsi que le pictogramme : ⑦ Lire la notice d'instruction avant utilisation
PERFORMANCES / CONFORMITE :
Conforme aux exigences essentielles de la Directive 89/686/CEE, notamment en terme de conception, d'ergonomie et d'innocuité.
Conforme aux exigences et méthodes d'essai des normes EN363, EN364, EN365, EN361, EN358 et EN813 (pour les ceintures
cuissardes).
Testé à 150 kg suivant EN361, EN358, EN813.
Autres composants dissociables :
Connecteur ou Gilet ou Ceinture ou Absorbeur d'énergie :
Respecter les consignes décrites dans la notice d'utilisation qui lui est propre.
WORK SUPPORT BELT AND THIGH BELT (ACCORDING TO EN 358 - EN813)
INSTRUCTIONS FOR USE
This manual must be translated (according to regulations) by the dealer, in the language of the country where the equipment is used. This
manual must be read and understood by the user before using the PPE.
The test methods described in the standards do not represent actual usage conditions. It is therefore important to study each work situation
and that each user is fully trained in different techniques in order to know the limits of the various devices.
The use of this PPE is restricted to qualified persons properly trained or working under the direct responsibility of a competent superior. The
user's safety depends on the continuing efficacy of the PPE, its strength and the proper understanding of the instructions in this manual.
The user is personally responsible for any use of this PPE which does not comply with the requirements of this manual and in the case of
non-compliance with the security measures applicable to PPE specified by this manual.
The use of this PPE is restricted to persons in good health, certain medical conditions may affect the safety of the user, in case of doubt
contact a physician.
Adhere strictly to the instructions for use, verification, maintenance and storage.
This product is inseparable from a comprehensive fall protection system (EN363), whose function is to minimize the risk of body injury from
falls.
Before any use, refer to the recommendations for use for each component of the system.
The fall arrest harness (EN361) is the only body grip to be allowed for use with a fall arrest system. It must be connected to the fall arrest
system by connectors (EN362).
The harness with thigh belt can be equipped with:
- 2 fall arrest attachment points: 1 back A + 1 sternal A/2,
- 2 attachment points of work positioning system: 2 lateral +1 ventral,
- Straps with or without "Riplight® silicone wave".
The harness can be fitted with connectors (EN362).
WARNING (BELT) :
If the user is in a fall risk area, this product cannot be used alone, it becomes inseparable from a comprehensive fall protection system
(EN363), whose function is to minimize the risk of injury from falls.
This belt with leg strap is a work support and fall from height prevention system.
WARNING:
THE BELT IS NOT A GRIP BODY DEVICE, ONLY THE HARNESS IS RESERVED FOR THIS FUNCTION (EN361). THE THIGH BELT
MUST NOT BE USED AS A FALL ARREST. In case of a fall risk, it is necessary to supplement this system with a collective or personal
restraint or protection device against falls from a height (EN363).
When working in suspension, the user's weight concentrated on the thigh belts causes significant pressure on the femoral arteries that can
cause injury. To guard against this: use a thigh belt (EN358 EN813) with a harness (EN361) designed for this use and follow the operating
instructions of each component.
The thigh belt can be incorporated into a harness (EN361). It can be equipped with connectors (EN362). It can be connected to a lanyard
(EN354), a tensioner with a support lanyard (EN358).
In these cases, follow the instructions described in their own manual.
MATERIALS:
- straps: polyamide, polyester
- metal parts: light alloy, aluminium alloy, steel, galvanized steel,
- plastic parts: polypropylene, PVC, polyethylene
- back, thigh belts: towelling (Belt)
14
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
EN
OPERATING INSTRUCTIONS
FALL ARREST HARNESS (ACCORDING TO EN361)
HARNESS GALAGO UPDATE : 31/07/2015 14/100