Securing The Pillar Mounting Bracket; Securing The Motors To The Gate Leaves - SOMFY SGS LINE Manuel D'installation

1 Installation

Securing the pillar mounting bracket

1
Secure the mounting bracket to the pillar with hardware adapted
to the mounting support.
Check before proceeding to the next step
Have you checked that the brackets are perfectly horizontal on the cylinders?
Fit the cylinder onto the mounting bracket
1
Fit the cylinder onto the mounting bracket.

1.3 Securing the motors to the gate leaves

Never operate the cylinder before having finished mounting it on the gate leaf. If this happens, the internal cylinder could be incorrect
and malfunctions could occur.
1
2
3
14
EN - SGS LINE installation and operating guide - SOMFY
2
Check that the bracket is at the right level. Retighten if necessary.
2
Block it with the pin (j).
Fix the unlocking mechanism (h) onto the gate leaf mounting
bracket (e) using screw (i).
Fit the cylinder onto the leaf mounting bracket.
Clip the unlocking mechanism onto the cylinder catch to
secure it.
Close the gate.
In the closed position, the gate leaves must be firmly against
the ground stop and the cylinder against its internal stop.