Erase The Memory Of The Motor; Technical Data - SOMFY LTN 50 PA RTS Notice D'installation

EN

6. 4. ERASE THE MEMORY OF THE MOTOR

N.B.: This reset deletes all control points, intermediate position (MY position) programmed.
N.B.: Before cutting the power, move the shade to the middle position.
Cut the power supply for 2 seconds.
1)
Switch the power supply back on for 5 to 15
2)
seconds.
Cut the power supply for 2 seconds.
3)
Switch the power supply back on: the shade
4)
moves during 5 seconds (If the shade position is
an end limit, the behavior of the shade will be a
jog).
Press the RTS control point (A) PROG button until
5)
the the shade jogs : all the RTS control points and
intermediate position (MY position) are cleared.

7. TECHNICAL DATA

Power supply
Radio frequency
Safety level
Operating temperature
Protection rating
8
Non contractual images
1
3
5
PROG.
A
120 V ~ 60 Hz
433.42 MHz
Class I
- 20 °C to + 50 °C
IP 44
Copyright © 2016 Somfy SAS. All rights reserved.
2
5 to 15
2 sec
sec
4
2 sec
A B
MY
220 V ~ 60 Hz