Adding A Remote Control; 2- Or 4-Button Remote Control; 3-Button Remote Control; Deleting A Remote Control - SOMFY SGS LINE Manuel D'installation

5 Programming the remote controls

5.2 Adding a remote control

2- or 4-button remote control

1
Press the button on the control
electronics for 2 seconds.
The indicator light comes on.

3-button remote control

1
Press the button on the control
electronics for 2 seconds.
The indicator light comes on.

5.3 Deleting a remote control

see "Clearing the settings" page 30.
28
EN - SGS LINE installation and operating guide - SOMFY
2
>2s
Position the new remote control to be
programmed on the control electronics
target.
2
>2s
Position the new remote control to be
programmed on the control electronics
target.
3
<0,5s
Briefly press the button on the remote
control to be programmed. The RADIO
indicator light will come on then go out
when you release the button on the remote
control.
Complete opening is programmed on
this button.
3
<0,5s
Briefly press a button on the remote control
to be programmed. The RADIO indicator
light will come on then go out when you
release the button on the remote control.
The remote control has been memo-
rised.