Tools Required For Installation (Not Provided); Hardware Required For Installation (Not Provided) - SOMFY SGS LINE Manuel D'installation

Tools required for installation (not provided)

PH PZ2
17

Hardware required for installation (not provided)

This information is provided for information purposes.
For securing the...
BRACKETS TO THE PILLARS/WALLS
BRACKETS TO THE GATE LEAVES
CONTROL UNIT
Hardware adapted to the material of the pillar/wall (screws, studs,
chemical seals, etc.):
- diameter: 8 to 10 mm
- hex head
Washers:
- internal diameter: 8 to 10 mm
- external diameter: 16 to 20 mm
Nuts:
- diameter: 17 mm
Hardware adapted to the material of the gate leaf reinforcement:
- diameter: 8 mm
- length adapted to the thickness of the gate leaf reinforcement
Washers supplied
- internal diameter: 8 mm
- external diameter: 22 mm
Hardware adapted to the material of the pillar/wall
- screw diameter: 3.5 to 4.5 mm - raised or flat-head screws
- Type "S" rawl plug for concrete: S5, S6 or S8
EN - SGS LINE installation and operating guide - SOMFY
Quantity
6
6
6
6
4
11