ULTRASOUND AND PNEUMATIC COMBINED LITHOTRIPSY MODE
Preparation
Refer to the handpieces manuals for handpiece preparation and
assembly details. Never connect a partially assembled handpiece to
the control unit.
Be sure that the control unit is off while connecting the
handpieces.
The Standby/On button light will turn orange 5 seconds after turning on
the unit. Press the Standby/On button to start the corresponding mode.
16
FB-411_US_ed_2013_10_Not_Swiss LithoClast Select BSC.indd 16
6/3/2015 2:33:53 PM