Maintenance - Boston Scientific Swiss LithoClast Select Mode D'emploi

MAINTENANCE

Should legal provisions in your country demand maintenance
intervals, these must be observed.
Display of the software version
When the device is turned on, the installed software version is
displayed for few seconds.
Display of cumulated operation time
During power up, the total time of ultrasound usage as well as the total
number of pneumatic impulses are displayed in the related displays
on front panel.
Ultrasound time
The cumulative ultrasound usage time (seconds/hours) is shown briefly
on the left display at start-up.
Remark: If the number is superior to 9999 (seconds), the hours mode is shown,
for example: 012h = 12 hours.
If the number is superior to 999h (hours), the exponential mode is used:
i.e. 45E3 = 45x10 = 45'000 hours
3
Pneumatic pulse counter
The cumulative number of pulses is shown briefly on the right display
at start-up.
Remark: If the number is superior to 9999, the exponential mode is used
For example: 56E4 = 56x10 = 560'000
4
28
FB-411_US_ed_2013_10_Not_Swiss LithoClast Select BSC.indd 28 6/3/2015 2:33:55 PM