Pulse Modes; Pulse Frequencies; Pneumatic Power; Activation - Boston Scientific Swiss LithoClast Select Mode D'emploi

Pulse modes

Select either single or multiple pulse mode with the "Litho mode" button.

Pulse frequencies

When the pulse mode is set to multiple, the frequency can be selected
with the arrow keys. Frequency is adjustable on a 1Hz to 12Hz range.
The last setting of the pulse mode and frequency is kept in memory
at power off.

Pneumatic power

The right rotary knob is used to adjust the pneumatic power in percent
from 0 % to 100 % (in 10 % increments).

Activation

Press the pneumatic (right) foot pedal to activate the pneumatic pulses.
14
FB-411_US_ed_2013_10_Not_Swiss LithoClast Select BSC.indd 14 6/3/2015 2:33:53 PM