Pneumatic Lithotripsy; Preparation - Boston Scientific Swiss LithoClast Select Mode D'emploi

PNEUMATIC LITHOTRIPSY

Preparation

Refer to the Pneumatic Handpiece Directions for use for
handpiece preparation and assembly details. Never connect a partially
assembled handpiece to the control unit.
Be sure that the control unit is off while connecting the handpiece.
The Standby/On button light will turn orange 5 seconds after turning on
the unit. Press the Standby/On button to start the corresponding mode.
12
FB-411_US_ed_2013_10_Not_Swiss LithoClast Select BSC.indd 12
The cumulative number of pulses is displayed briefly on the
right display when the unit is turned on.
6/3/2015 2:33:52 PM