User Interface; Introduction; Display Screen - Medtronic Prostiva RF 8930 Manuel D'utilisation

8930EN_2.fm 12/17/10 2:43 pm
UCxxxxxx EN
7 x 9 inches (178 mm x 229 mm)

User Interface

Introduction

Display Screen

MA07445A008 Rev X
Radio Frequency Generator Description
This section describes the operation of the hardware and software
components. These components provide you with the information
and the control of the Prostiva RF Therapy Generator. The
generator consists of three main components: hardware, core
software, and application software. The flexibility of the hardware
and the core software enables Medtronic to provide future
updates to the Prostiva RF Therapy.
The features of application software for the Prostiva RF Therapy
are outlined in this section.
Liquid Crystal Display (LCD) 640 x 480 pixels of 16-bit color with
a touch screen overlay for user input. The overlay is designed for
use with or without surgical gloves. There is no keyboard or
mouse, so user inputs are made through the touch control buttons
on the display screen.
The display screen window (Figure 2-7) can be classified into four
information and control areas:
Lesion digital and graphic readouts (color coded)
■
Operating messages
■
Lesion time and count
■
Control buttons
■
The digital and graphic readouts for temperature are respectively
color coded as follows:
Left needle-green
■
Right needle-red
■
Urethra-aqua
■
The needle impedance (Ω) and power (W) digital readouts follow
this same color coding.

User Interface

2010-12 8930 System User Guide English
Medtronic Confidential
CRMRef_R06
31