MSA BEAMGLIDE 506252 Instructions D'utilisation page 36

P/N R621595
12.4 FORMAL INSPECTION CHECKLIST AND CODES
TYPE OF PARTS INSPECTED
Metallic
Plastic
Lubrication
Wheels
Pivotable
Page 36
CONDITION
Deformed/fractured
Corroded/deep pits
Missing/loose
Heat exposure
Chemical exposure
Burns/sharp edges
Cuts/deep nicks
Malfunction
Other
No visible change
Cut/broken/deformed
Wear/ damage
Missing/loose
Burns/heat exposure
Chemical exposure
Other
No visible change
Gummy
Discolored
Lube. fittings not in place
Non-existent/not sufficient quantity
Other
No visible change
Deformed/fractured
Corroded/deep pits
Missing/loose
Do not move freely
Do not roll in unison
Other
No visible change
Does not swing freely
Does not swing to clear flange of beam
Other
No visible change
COND. OVERALL ASSESSMENT
CODE CODE
M1
M2
M3
M4
MA - Metallic acceptable
M5
M6
MN - Metallic not acceptable
M7
M8
M9
M0
P1
P2
P3 PA - Plastic acceptable
P4
P5 PN - Plastic not acceptable
P6
P0
L1
L2
LA - Lubrication acceptable
L3
L4
LN - Lubrication not acceptable
L5
L0
W1
W2
W3 WA - Wheels acceptable
W4
W5 WN - Wheels not acceptable
W6
W0
V1
VA - Pivot acceptable
V2
V3
VN - Pivot Not acceptable
V0
USER INSTRUCTIONS ■ BEAMGLIDE
LEGEND
DISPOSITION:
A - (Acceptable)
N - (Not acceptable)
Enter "A" (or "PASS") or "N" (or "FAIL") in Disposition
blank on Formal Inspection
Criteria for disposition of "N" (Not acceptable):
If there is one or more Overall Assessment Code of
"N" type (e.g. MN, PN, LN, WN, or VN).
Copyright © 2014, MSA
TROLLEY
™