Wheel Change - Reely Dune Fighter Notice D'emploi

Check, the following positions regularly after several drives:
• Check looks and contact distance of the spark plug.
Spark plugs wear, especially in the running-in phase. Therefore, we recommend that you always keep some spark
plugs at hand for replacement.
Use only spark plugs of type „CMR7H"! Wrong or worn spark plugs will cause the engine to run incorrectly and im-
pairs reconciliation. Installation and replacement of the spark plug requires a spark plug wrench. The ideal electrode
distance of intact spark plugs is 0.7 mm.
• Check the carburettor and brake linkage.
b) Wheel Change
Wheel change requires a size 24 socket wrench (e.g. the enc-
losed wheel nut wrench). When screwing on the wheel, observe
that the nut is grooved on one side (upper figure).
This grooved side must point to the wheel/rim and serves to pro-
tect against independent loosening of the nut.
Do not tighten the nut forcefully, however.
62
Figure 23