Controller Operating And Control Elements - Burkert 8035 Manuel D'utilisation

4 OPERATION
The operation is classified according to three levels.
A) Display
This menu allows the user to control the dosing by the keypad (start, pause, reset, stop);
using the LCD display, he can monitor the flow rate and the initial preset volume throughout
the dosing operation. The readings of the main counter and the daily counter are displayed
within this menu. The daily counter can be set to zero.
B) Parameter Definition
This menu enables the setting of dosing parameters (languages, measurement units, equip-
ment, K factor, dosing option, overfill correction, alarm and relay thresholds). Simultaneous
resetting of the two counters is carried out within this menu.
C) Testing
This menu enables the user to check the binary inputs (remote control) and to simulate the
operation of the relays.
It also caters for measuring the rotation frequency of the paddle wheel.

4.1 Controller Operating and Control Elements

To scroll-up the menus or
increase a value
To scroll-down the
menus or select a digit to
be modified
BATCH CONTROLLER 8035
Relay 1 status
E-14-
Validate chosen
parameter or menu
Relay 2 status