Burkert 8035 Manuel D'utilisation page 71

5 MAINTENANCE
c) Dosage through Binary Inputs and activated by EXT.MEM
**
ALARM
4
(**) When in mode EXT.MEM or EXT [T], you can also press the Enter key on the keypad.
"ALARM" PROMPT AT THE END OF A DOSAGE
The «ALARM» prompt will be displayed at the end of a dosage operation (irrespective of the
dosage option) if one or both valves are closed and if the controller detects that there is still
a flow condition after the time delay period before alarm triggering has elapsed.
Note: The alarm time delay must take account of any jet correction that may have been
entered (the fluid quantity which continues to flow after the closure of the valve).
a) Manual or automatic dosage activated by LOC.MANU, LOC.MEM or
MEM+MANU
ALARM
b) Dosage through Binary Inputs and activated by EXT.MEM or EXT [T]
ALARM
(**) When in mode EXT.MEM or EXT [T], you can also press the Enter key on the keypad.
RESET
4
Choice "Continue" can only
be made on keypad.
CONTINUE
4
Device ready for a new
ENTER
batch (see 4.3.1)
Device ready for a new
**
4
batch (see 4.3.2)
E-32-
BATCH CONTROLLER 8035
Device ready for a new
**
batch (see 4.3.3)
Current batch
**
221 L
continues