Introduction; User's Responsibility For Safety; Unpacking And Control; Electromagnetic Compatibility - Burkert 8025 Notice D'utilisation

1 INTRODUCTION

BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR
ADVICE AND READ THE ENTIRE
MANUAL THOROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage. Compare the
Type specifications on the label to the
adjacent list to ensure that you have
received the proper unit. If there is any loss
or damage, please contact your local
Bürkert subsidiary.
1.2 About this Manual
This manual does not contain any warranty
statement. Please refer to our general
terms of sale and delivery.
Only properly-trained staff should install
and/or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
BATCH CONTROLLER 8025

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of
batch controllers. While each of these
products is designed to operate in a wide
variety of applications, it is the user's
responsibility to select a transmitter model
that is appropriate for the application,
install it properly, and maintain all
components. Special attention must be
paid to the chemical resistance of the
transmitter against the fluids which are
directly contacting the product.
This symbol appears in the
manual to call special attention
to instructions that affect the
safe installation, function and
use of the product.

1.4 Electromagnetic compatibility

This device fulfills the essential
requirements of te directives 2004/108/EC
(EMC) and 73/23/EC (DBT).
In order to comply with the directives, the
wiring instructions must be followed.
The device has been tested according to
the following EMC standards:
- EN 61000-6-3
- EN 61000-6-2
- EN 61010-1
E-2-