Burkert 8035 Manuel D'utilisation page 58

4 CONFIGURATION
4.3.2. Dosing in automatic mode
(«LOC.MEM», «MEM+MANU», or «EXT.MEM» Options)
Generation of the volume from one of the 7 values previously entered into the memory. The
selected volume can be initiated either from the keypad or by the binary inputs.
A) Initiating the dosing from the keypad («LOC.MEM», «MEM+MANU» Options)
BATCH A
ENTER
Zero quantities (from V1 to V7) will not be displayed.
B) Initiating the dosing from the binary data inputs («EXT.MEM» Option)
2885 L
Choice of volume from memory
by encoding the binary data
inputs 1, 2 and 3.
«ALARM» prompt during dosing operation: dosing problem (see § 5.1.)
During the dosing of the selected volume, it is possible to display the flow rate, to pause, to
reset or to stop the operation (see § 4.3.4. and § 4.3.5)
1 sec.
V1 250 L
V2 50 L
V7 1250
END
ENTER
1 sec.
1 V2
2
3
E-19-
BATCH CONTROLLER 8035
OK Y/N
ENTER
OK Y/N
* You can also start the do-
L
sage using the "Start/Pause"
binary data input (see 4.2.4).
50 L
4
Enabling of input 4
(push button for example)
to initiate dosing
Countdown of the
volume to 0
*
250 L
ENTER
ENTER
Countdown of the
volume to 0
38 L