Publicité
3 Getting Started
The default OVP setting for all models is 120% of the output rating. You can change the OVP setting
using the numeric entry keys and pressing Enter and Select. Press the Meter key to return to meter
view.
Enable the Output
SHOCK HAZARD, LETHAL VOLTAGES - Many models generate output voltages up to
2,000 VDC! Ensure that all instrument connections, load wiring, load and sense
connections are insulated using high-voltage wire. Always attach the safety cover
provided, so that no accidental contact with lethal voltages can occur.
Use the On/Off key to enable the output. If a load is connected to the output, the front panel display
will indicate that it is drawing current. Otherwise, the current reading will be zero. The status indicator
shows the output's status. In this case, "CV" indicates the output is in constant voltage mode.
For a description of the status indicators, refer to
Use Built-in Help System
Press the Help key at the lowest menu level to display help information about the menu function
controls.
Whenever a limit is exceeded or any other invalid configuration is found, the instrument will display a
message, including Error code information.
Press Meter or Back to exit Help.
96
Front Panel Display at a
Keysight RP7970 & RP7980 Series Operating and Service Guide
Glance.
Publicité
